Introduction to Fluke Fishing
A flat fish with a lot of attitude, flounder are fish that most fisherman never forget. They are masters of camouflage and they are so quick you might think you were seeing a shadow. Seldom will you find an east coast fisherman who doesn’t enjoy fishing for fluke. These tasty white fish are pleasant to the palate and they are fighters – and make for a great fishing outing.
In the northeast you can find flounder near the shorelines as early as May. The warmer the water the more likely you are to find them hiding out seeking their favorite foods – sand eels, squid and other baitfish – and they can generally be found in shallow beach waters, bays and tidal river mouths. In the dead of summer, you can find flounder lurking as close as 30 feet from shore – or as far away as 120 feet. They like to stay in water temperatures that they are comfortable in but where food isn’t too far away. The cooler the temperatures, the closer to the shore they’ll be found. In the late fall, you’re going to find them making their annual trek down the coast towards the warmer waters on the Atlantic coast. Fluke are not fond of northeast winters.
Like fishing for any other type of fish, you probably have your own distinctive approach to fluke fishing, mostly dependent on the water’s depth. When fishing throughout the earliest and latest months of the season, you will probably do best in the shallows, typically at a deepness of roughly 20 feet (or less). It’s best to opt for regular tackle or a spinning rod. You should rig the jigs with squid, generally in the 1-4 oz range, then cast the rig directly down from the boat, which should be drifting at this time. You have to be sure that the jig is weighted sufficiently to sink toward the waterbed where the fluke feed.
How you work the jig is vital, and this should be done by using the boat’s drifting motion to signal when to raise and lower the jig. Typically, it should be raised and lowered a foot or two from the waterbed by simply adjusting the tip of your rod. Then, you can drop the jig gradually to draw the most attention.
If this method fails, you may decide to utilize the snap method, which is most useful when managing a school of lazy fish, seeing as it grabs their attention. The snap method is very easy for you to use: just let the line reach the bottom of the waterbed then snap it back. Let the line go limp, and this motion will catch the attention of even the laziest fluke.
After catching that first fluke, try to make note of where you are at and what equipment you are using. Triangulation is an effective method of pinpointing your location, and using a GPS system is the easiest method of notating position. GPS systems are also virtually indispensable when you are attempting to locate a school of fluke.
When the season starts to get hot, fluke will begin to stray from the shoreline. At this point, you’ll probably need to swap over to target fishing. This calls for spinner rigs, which are enjoyable to create, but they can also be found in high-quality bait and tackle shops. You’ll likely decide to try out a number of diverse pre-made spinners until you find your favorite. Once this is learned, you may even choose to design your own spinner rigs. Spinner rigs are not complex, and mostly consist of three eyes. The first and primary eye connects to the main line, eye two is attached via a sinker, and the final eye is connected to a leader.
By no means complicated, spinner rigs are made of three eyes in most cases. These eyes include the first—and chief—eye, which connects to the main line, a second eye two attached to a sinker, and a third eye connected by a leader. If you prefer to create a higher quality spinner, beads and a spinner blade are situated over the hook. Your favorite bait and sinkers help ensure that the line will drift in relation to the waterbed and develop a visual queue as the boat drifts by revolving the spinner blade in front of the hook. It should also generate a vibration that will catch the attention of the fluke.
On trips that you are trying to catch a larger number of fluke, it’s smart to utilize a mixture of techniques. Deeper water rigs can be helpful as the fluke migrate to the cooler waters later in the season. These rigs can allow you to catch fluke easily and quickly. Following these brief and easy tips can assure that you will at least know how to catch those tasty fluke.
When Fluke fishing it is important the use proper equipment, some supplies to consider are Penn Reel and Shimano Fishing Reel.
Related posts:
- Winter Flounder Fishing
- Fishing Rigs: article 30 Old Master Special Fishing Details On How To Fish With Nightcrawlers Details Here!
- Fishing Rig: A35 Old Master Special Fishing Details On Crappie Fishing Rig Click Here!
- Reel Repair and Maintenance
- Fishing Rigs A34 Old Master Special Fishing Details About Black Crappies And Calico Bass And Crappie Baits Visit Our Website For Details!
